TMDT, TMDR, TMDR Series Parametric Table

UP-CONVERTERS TMDT Series	DOWN-CONVERTERS TMDR Series	REPEATERS	FREQUENCY RANGE	RF POWER (DBM)(BPSK,QPSK, 8PSK)	RF POWER (DBM) (16 QAM)
TMDT 2/28	TMDR 2	TMDR 2/28	1.3 - 2.7 GHz	28	25
TMDT 2/32	TMDR 2	TMDR 2/32	1.3 - 2.7 GHz	32	29
TMDT 2/38	TMDR 2	TMDR 2/38	1.3 - 2.7 GHz	38	35
TMDT 4/26	TMDR 4	TMDR 4/26	4.2 - 4.8 GHz	26	23
TMDT 4/32	TMDR 4	TMDR 4/32	4.2 - 4.8 GHz	32	29
TMDT 4/35	TMDR 4	TMDR 4/35	4.2 - 4.8 GHz	35	32
TMDT 8/16	TMDR 8	TMDR 8/16	5.4 - 9.9 GHz	16	13
TMDT 8/26	TMDR 8	TMDR 8/26	5.4 - 9.9 GHz	26	23
TMDT 8/32	TMDR 8	TMDR 8/32	5.4 - 9.9 GHz	32	29
TMDT 8/35	TMDR 8	TMDR 8/35	5.4 - 9.9 GHz	35	32
TMDT 10/16	TMDR 10	TMDR 10/16	10.0 - 12.7 GHz	16	13
TMDT 10/26	TMDR 10	TMDR 10/26	10.0 - 12.7 GHz	26	23
TMDT 10/32	TMDR 10	TMDR 10/32	10.0 - 12.7 GHz	32	29
TMDT 10/35	TMDR 10	TMDR 10/35	10.0 - 12.7 GHz	35	32
TMDT 14/26	TMDR 14	TMDR 14/26	12.8 - 15 GHz	26	23
TMDT 14/32	TMDR 14	TMDR 14/32	12.8 - 15 GHz	32	29
TMDT 14/35	TMDR 14	TMDR 14/35	12.8 - 15 GHz	35	32

TMDT, TMDR, TMDR series Up & down converters characteristics
IF frequency 70 MHz for TX, L-band (950 - 2250 MHz ) for RX (others on request)
Output power tolerance (TMDT & TMDR series) ± 1 dB
RF impedance 50 W

Frequency stability:
For frequencies below 3 GHz ±10 ppm
For frequencies above 3 GHz ± 45 ppm (±10 ppm on request)
Amplitude frequency response (fc ± 10 MHz) ± 0.25 dB
Group delay response (fc ± 10 MHz) ± 2 ns
Receiver noise figure < 5 dB
Image rejection > 70 dB
Receiver sensitivity (for B.E.R.<10exp-5) <-90 dBm

DQM IF Modulator & Encoder Characteristics
Modulation QPSK (DVB-S compliant) (8PSK or 16QAM on request)
IF Output Frequency 70 MHz (L-band on request)
Output level + 5 to -15 dBm adjustable
Output Connector BNC
Output Impedance 50/75 W selectable
Bit-Rate Up to 48 Mbit/s
Code Rate 1/2,2/3,3/4,5/6,7/8 selectable
Symbol Rate Up to 30 MS/s
Channel Bandwidth Dependent on the symbol rate setting (from 3 to 40 MHz)
Video Input Standard PAL-NTSC-SECAM selectable
Analog Video Input CVBS composite (BNC) and S-VHS (Y-C)
Analog Video Input Level 1 Vpp ± 6 dB
Digital Video Input (optional) SDI standard
Analog Audio Input Balanced (DB9 Connector)
Analog Audio Input Level -10 to +16 dBm
Digital Audio Input AES-EBU (DB9 Connector)
Video encoding format MPEG-2 4:2:0 MP@ML (4:2:2 on request)
Audio encoding format MPEG-1, Layer 2, up to 448 kbps
Transport Stream Output LVDS, optional ASI
Transport Stream Input (optional) ASI
Remote Control (option) RS 232

DQD IF Demodulator & Decoder Characteristics
Modulation QPSK (DVB-S compliant) (8PSK or 16QAM on request)
Input IF frequency L-Band (70 MHz on request)
Input level From –65 to –20 dBm
Input connector “F” female
Input impedance 75 Ohm
RF input attenuator 0/20 dB programmable
Symbol rate From 2 to 45 MS/s
Code Rate 1/2,2/3,3/4,5/6,7/8 selectable
Transport stream interface (optional) LVDS
Video Output Standard PAL-NTSC-SECAM selectable
Analog Video Output CVBS composite (BNC)
Analog Video Output Level 1 Vpp adjustable
Digital Video Output (optional) SDI standard
Analog Audio Output Balanced
Analog Audio Output Level 0 to +16 dBm
Transport Stream Output LVDS (optional ASI)
Remote Control (optional) RS 232

General operating conditions:
AC operating voltage 115/208/230/240 Vac±15%, 47 to 62 Hz singlephase
DC operating voltage (optional) 24 Vdc±20%
Operating temperature range -5° ÷ +45° C
Humidity 95% max